At present, in the general optical fiber wiring network, because the technology and quality of the fiber used in wiring are generally relatively stable, the characteristics of optical cables and various optical fiber connectors, jumps, tail fibers and other components composed of optical fibers are relatively stable, and and of. In the actual use of the wiring, they are relatively fixed, so they may actually affect most of the reasons for the stability of the optical fiber network.

At present, more commonly used optical fiber connection technology for analysis and discussion:

1. Follow method

Fiber fiber measuring is a way of connection that is currently adopted more. Relatively speaking, melting is a way with high success rates and high connection quality, but at the same time, it should be noted that the melting joints are relatively vulnerable to damage or failure. One of the main factors is that the maintenance operation of equipment is necessary during the use and maintenance process, so its security is a problem we must consider.

Under normal circumstances, the melting can get smaller connection loss. Generally, below 0.2DB, but the loss loss loss is not easy to control. At the same time, during the fiber fiber measuring process, there are many external factors that affect the quality of the melting quality. There are not many MTP -like band -shaped fiber connectors, while band -shaped fiber fiber melting machines cannot avoid the reality of individual fiber loss during the melting process.

2. The way of cold or on -site grinding optical fiber connectors

Anyone who has been engaged in factory manufacturing and production of fiber -fiber products should be very well understood. On -site grinding and factory manufacturing are two unprecedented ways that are not comparable. In the process, the scene cannot be adjusted and the same is unable to maintain the consistency.

Perhaps in the traditional low -speed networks in the past, even if there is a loss of insertions and over -loss, and unstable connection, etc., it may be acceptable for network applications, because fiber fiber has enough affluent and digestive effects. However, in the network where the performance is getting higher and higher today, many indicators and parameters are extremely sensitive, because the link does not meet the design requirements or timely effort, causing the designer or the construction to hurt the brain. The requirements and tests that cannot be passed occur from time to time.