In the construction of machine rooms in the Internet era, comprehensive network computer room wiring is a very important and complicated project. Only by designing the comprehensive wiring scheme of the network computer room can it ensure the normal operation of the software and hardware in the machine room. Low work efficiency and high maintenance costs.

Network computer room comprehensive wiring design

Before the computer room starts the wiring, we need to predict the equipment needs of the computer room. For details, please refer to the following two points:

1. Determine the number of information points and the number of information points in the work area, and then make a reasonable design of the wiring structure of the computer room.

When the area of the machine room is small and the information point is below 200 points, the horizontal wiring method can be used to install the wiring frame in the network machine room wiring cabinet, and the information point of the computer room is directly connected to the wiring frame.

When the area of the machine room is large and the information point is more than 200, two levels of wiring are used: horizontal subsystems and trunk subsystems. Place the FD (floor wiring equipment) where the computer room information is dense (such as the host room). After passing through the switch, connect to the network room through the main line.

2. Select the right wiring level according to the requirements of the system bandwidth.

At present, the two common types of systems on the market are super -five systems (the bandwidth of the super five systems is 155MHz) and the six -type system (the bandwidth of the six types of systems is 200MHz). Six types of network jumps, if you want higher performance, you can choose more than six types of products.

 Product choice

1. Server cabinet

The server cabinet supports computer server and data storage devices, which meets the 19 "international standards, measurement systems and EISI standards. It uses high -quality cold -rolled steel plates, and the surface is treated with anti -rust phosphorus treatment. It has good heat dissipation, availability and safety. Easy to install.

2. Ethernet switch

The switch selects a three -layer 10,000 -scentralized and multi -agencies fixed configuration of the Ethernet switch with a large -capacity and high -density port. Essence

3. Light module

The trunk uses 10G SFP+, 40G QSFP+light module.

4.

AMP 

TCL and other well -known brands

5. Optical fiber jumper

Use 10G 40G optical fiber jump line

6. Network jump

Gigabit jumper

7. Optical fiber wiring box

Select 12 -core, 24 -core well -known brand optical fiber wiring box.