Optical fiber jumper refers to the power plugs of RF connectors on both sides of the optical cable. In optical fiber communication, the common specifications of optical fiber connectors are SC, FC, MTRJ, LC and other specifications. Optical fiber jumpers have a thicker protective layer, and are generally used in the connection between optical transceivers and terminal equipment.

Fiber patch cords are divided into single-mode and multi-mode. The skin of single-mode fiber optic patch cords is generally yellow and white, and the multi-mode fiber optic patch cords are generally orange. The fiber optic patch cords are relatively soft and are mainly used for wiring in the room.

The connector of the optical fiber jumper is very weak. Compared with the ordinary network cable jumper, the maintenance of the fiber jumper is very complicated.

1. When applying optical fiber jumper wiring, the connector of the optical fiber must be protected with a protective cover to prevent oil stains and dust from affecting the coupling of the optical fiber, affecting the transmission rate and spacing.

Fiber Jumper

2. If the connector of the optical fiber jumper is dirty, it will affect the actual effect of transmission. Therefore, the connector must be protected. If it is accidentally dirty, it is best to use ethanol to clean it, not tap water.