Chinese name optical fiber jumping line foreign language fiber jumper wire action to connect classification FC jumper, SC jump line directory 1 structure 1 structure 3 Classification 3 Classification 3 Category 5 Application 6 Selection Guide 7 Installation Point 8 Extracting Points 8 Differential 9 grinding method 10 How to detect 1 Structural editing optical fiber jump line (also known as optical fiber connectors) refers to the connecter plugs at both ends of the optical cable to achieve optical road activity connection; a plug one end is called tail fiber. [1] Optical Fiber Patch Cord/CABLE is similar to the coaxial cable, but there is no mesh shielding layer. The center is the glass core spread. In the multi -mode fiber, the diameter of the core is 50 μm ~ 65 μm, which is roughly comparable to the thickness of the human hair. The diameter of the single -mode fiber core is 8 μm ~ 10 μm. A glass seal with a layer of refractive index is lower than the core of the core to keep the fiber in the core. The outside is a thin plastic jacket to protect the seal.

2 Category Edit Fiber Planets can be divided into common silicon bases according to different transmission medium

Optical fiber jumping line commonly used head

Fiber jumping lines are commonly used in single -mode, multi -mode jump lines of fiber fiber, and other optical fiber jump lines such as plastic transmission medium; according to the connection head structure, it can be divided into: FC jump line, SC jump line, ST jumping line, ST jumping line , LC jumper, MTRJ jumper, MPO jumper, MU jumper, SMA jumper, FDDI jumper, E2000 jumper, DIN4 jumper, D4 jump line and other forms. The more common fiber-jump lines can also be divided into FC-FC, FC-SC, FC-LC, FC-S, SC-SC, SC-S.

Single-Mode Fiber: The general fiber jump is represented by yellow, the joints and protective suits are blue; the transmission distance is long.

Multi-Mode Fiber: Generally represented by orange jump lines, some are represented by gray, the joints and protective sets are beige or black; the transmission distance is shorter

3 Pay attention to editing the receiving wavelength of the light module at both ends of the fiber jump line must be consistent, that is, the ends of the fiber must be the light module of the same wavelength. The simple distinction method is that the color of the light module should be consistent. In general, the short -wave light module uses multi -mode fiber (orange fiber), and the long wave optical module uses single -mode fiber (yellow fiber) to ensure the accuracy of data transmission.