The fiber jumping line is the fiber of the connectors on both ends. Its function is to connect the road wiring from the device to the fiber wiring link, which is generally connected between the optical end machine and the terminal box. The tail fiber is a fiber with a connector with only one end. Tail fiber (product recommendation: SC multi -mode tail fiber, ST monopoly tail fiber) can be made of optical fiber jump line. The fiber jump line can be divided into single -mode fiber optic jump lines and multi -mode fiber jump lines according to the type of fiber. Generally, single -mode fiber optical fiber jumping line transmission distance is long, and multi -mode optical line jump transmission distance is shorter.

Let's take a look at the interface type of the fiber jump line (product recommendation: ST-LC fiber jump line). The types of optical fiber jumping lines are commonly used in FC, SC, ST, PC, APC, and LC. The fiber jump lines of the FC joints are mostly used on the wiring shelf, while the optical fiber jump lines of the SC joints are mostly used on the router switch. In addition, there are various forms of fiber interface types such as MTRJ, MPO, MU, SMA, FDDI, E2000, and D4. The meaning of several common fiber jumping line interfaces is as follows:

FC round belt thread

ST card connecting round type

SC card connection square

PC microspheres grinding and polishing

The APC is 8 degrees angle and a microfinage grinding and polishing