The factory is moving to a new building and needs to be rewired. Let's discuss, there is a 5-story factory, each floor has a computer, and the computer room is on the 2nd floor. Our factory has about 60 computers and 100M telecommunications broadband.

  Program:

Since it is a new factory, it is best to do it all at once, that is to say, more than 60 computers should not only have more than 60 lines, it is best to take into account the increased problem, so you can put more lines as appropriate.

According to the area of the factory building, the area within each 100-meter route is used as a wiring area, and a small wiring area is set up. The equipment here can be wall-mounted or placed in a set of cabinets.

The routing mainly adopts suspended bridge wiring, and the terminal panel is connected to the wiring area through metal pipes and bridges. Optical cable is used for wiring between multiple wiring areas, and the optical cable adopts outdoor armored multi-core single-mode.

The terminal jumper adopts FTP shielded jumper to prevent noise interference. If there is a long-distance twisted pair cable that is not prevented from being in the metal channel or metal tube, the cable needs to be wired in shielded form.

This is just a case, you can refer to it, but if you want the same, it is basically impossible. If you have any needs, please contact us.