pay attention.

(1) The comprehensive wiring system must be designed in advance, and the installation projects such as civil construction, fire protection, air conditioning, lighting and other installation projects can be used to avoid unnecessary construction conflicts.

(2) Under the circumstances of conditions, the weak electricity should take its own weak electric well to reduce the chance of being disturbed by electromagnetic interference. The floor wiring room and the host room should be arranged as much as possible to prepare for development and maintenance. For the network, the laying of the physical layer is important because it is the foundation. As well as

(3) Try to cloth as many points as possible, and use hole panels (a voice, one data) to coordinate with the power supply and cloth power supply point near the information point. Because the comprehensive wiring is generally a one -time project, the lines are ready, and it is relatively difficult to change the wiring. As more and more development and communication are, more more cloth is more secure.

(4) Do not idealize the comprehensive rich line over -reasoning, do not integrate some more dedicated networks to the comprehensive wiring. Comprehensive wiring to integrate telephone networks, computer networks, and building self -control networks.

(5) As the network equipment develops rapidly, it should be opened as much as possible when choosing a plan. For more buildings, optical fiber should be used for data backup instead of cable.

(6) Due to the continuous reduction of the price of light products, the wiring of large open rooms should consider more light spots, which is beneficial to network construction.

(7) When laying a dark tube, a large diameter should be used, leaving a balance. When laiding the optical cable, pay special attention to the turning radius. If the turning radius is too small, it will cause serious losses in the link. Carefully check each optical cable, especially the panel box of the light connecting point. It is good when you go to the box. The test is not good after installing it. The reason is that the corners of the optical cable turn too small after installing it, causing serious losses.

(8) With the price reduction of the light melting equipment, where conditions are conditions, you can consider giving up the traditional ST and SC head production methods. The use of tailing and fiber -fiber -molizing methods can ensure the quality of optical roads.

(9) Do not pursue the brand of wiring products one -sided. In recent years, in fact, some domestic manufacturers have produced non -screen lines, optical cables, modules and other network equipment performance. Consider using our products.