The network cable socket mentioned here, the correct name should be the network cable module, which is generally used as a network cable jack on the indoor wall. Nowadays, twisted pair cables are generally used in the family. The twisted pair cables are divided into two line sequences: T568A and T568B. The access standard of the information module end is divided into two types: T568A standard and T568B standard. Our network cable sockets or network cable crystal heads are only You can choose one way to connect between A and B. If one end is connected wrongly, there will be no response.

There is no essential difference between A and B, only the difference in color. The respective wiring methods are:

Connection method of T568A: green-white, green, orange-white, blue, blue-white, orange, brown-white, brown;

Connection method of T568B: orange-white, orange, green-white, blue, blue-white, green, brown-white, brown;

On the genuine network cable socket, in addition to the color codes indicating the two connection methods of the 568A standard and the 568B standard, the eight wiring bayonets also indicate the corresponding serial number of each internal terminal and the front pin, and the various colors on the socket are marked. The markings are very clear and recognizable. When wiring, you only need to drive each color wire pair in the twisted pair into the corresponding color-coded bayonet.

Step 1: Use a special wire stripper or a wire stripper of a wire crimping tool to strip the network cable (or slotted wire) in the wall at the place where the wire end is about 10 cm long (or a little longer, which is convenient for later crimping). Remove (don't hurt the metal wiring).