The micro-package (without head, SPL9102) optical splitter is mainly installed in the splice tray, and the input and output ends are connected by welding for optical signals.

The micro-package (with head, SPL9105) optical splitter is mainly installed in the splice tray, or in the open splice area, and the output end uses wiring to connect the optical signal. The input terminal can be wired or welded (need to cut off the connector) according to customer requirements.

The modular optical splitter (SPL2803) is an adapter that has already encapsulated the optical splitter in the module, and plugs the pigtails that need to be connected to the SPL2803 as required. Generally, the modular optical splitter is used more in SSC and FAT.

The same is true for the small box type pigtail fiber splitter (SPL2605), which encapsulates the splitter in the module

, When using, the pigtails that are thrown out are connected to optical signals by wiring. Generally, small box type pigtail fiber splitters are used more in FDT.

The 19-inch rack-mounted optical splitter is packaged in a larger 19-inch standard module for easy installation on ODF and FDT.