1. Select the trunking wiring router. In order not to affect the appearance better, the leather cable should be routed along the base line, door cover and other wiring grooves as much as possible, and choose a router with fewer corners, and the wall is flat and clean (double-sided tape can be applied) fixed wireway).

2. Select the wire slot installation method (double-sided tape sticking method or screw fixing method).

3. When using the double-sided tape sticking method, use a cloth to scrub the wall on the wiring trough wiring router so that there is no dust and waste on the wall, then stick the double-sided tape on the wiring trough and spare parts, and stick them to fix on the wall.

4. When choosing the screw fixing method, the wire groove and the spare parts should be fixed on the wall according to the screw fixing parts marked on the wire groove and the spare parts. Generally, the 1-meter straight groove should be fixed with 3 screws.

5. According to the specific conditions of the construction site, the wire trough and spare parts are composed. When laser cutting the straight groove, because the wire groove cover and the bottom groove are matched, it is generally not suitable to solve the wire groove cover and the bottom groove separately.

6. Put the leather cable into the slot, and pay special attention not to clip the cable to the bottom slot when closing the slot cover.

7. After confirming that the wire slot cover is tight, use a cloth to wipe off the stains left during work.