As we all know, the raw material of optical fiber jumper is glass, so it is more sensitive than copper core wire, and it must be paid more and more attention and maintenance in actual operation and supervision. The stability and performance of the optical fiber are closely related to its bending radius. If the optical fiber is bent too much, the optical signal transmitted inside the optical fiber can easily be mapped and spilled out of the optical fiber insulation layer, thereby reducing the hardness of the optical signal. Losses caused by fiber bending are called bend losses.

In addition, fiber bending, especially when installing and pulling fiber jumpers, can cause micro-cracks in the fiber, and even cause permanent damage to the fiber. The path of the fiber jumper is closely related to the bending radius, which has a great influence on the performance and maintenance of the leaking wire. Therefore, the path to define each fiber jumper should be established.

If the fiber jumper router is unreasonable, it may cause excessive congestion on the terminal panel and increase the risk of excessive bending radius. Conversely, if the fiber patch cords are well managed, the problem of excessive bend radius is less likely to occur everywhere, and you can find a particular fiber patch cord quickly and accurately.

The third element is the universality of the installed fiber optic patch cord. If you can easily find installed fiber patch cables, universality plays a very important role in the whole process of Internet reconfiguration, which immediately affects the stability of the Internet and the cost of Internet reconfiguration.

The optical fiber patch cord between each machine and equipment of the router can affect the stability of the Internet to a large extent. If the optical fiber patch cord is not properly maintained, skilled workers and equipment will easily cause damage to the optical fiber patch cord. Therefore, it is very important to carry out physical maintenance of the installed fiber patch cords.

Do not pull or squeeze the fiber patch cords. When installing a fiber optic patch cord, excessive force may stress the fiber optic patch cord and the RF connectors on both sides, thereby affecting its performance.