Most of the integrated wiring is a hidden line project. There are many problems in the later modification and maintenance. To build a reasonable design for stable network and safe wiring, what details should integrated wiring manufacturers pay attention to?

1. Demand for office wiring

Requirements for telephone: use telephone switches to effectively connect the enterprise with the outside world, and at the same time facilitate internal calls.

Requirements for computer network: The integrated wiring adopts a star structure, which can support current and future network applications----10Mb Ethernet, 100Mb Fast Ethernet, 1000Mb Gigabit Ethernet.

Demand for image transmission: analog image, digital image, conference TV, etc.

In a modern office environment, communication must be stable and reliable at all times. When the following situations occur, we must carefully consider the wiring system: before the construction of the new building, during the construction of the new building, when the old building is renovated, when the enterprise needs to move to a new location; when the company's telephone and computer applications increase, but not yet When using integrated wiring; when the previous wiring system of the enterprise cannot meet the needs.

2. The installation position of the information socket

For the office building environment, the office space has large bays and small rooms with four walls. There are different mounting methods for panel mounting of the workspace subsystem in these two forms. A small room does not need a partition board, and the information socket only needs to be installed on the wall; for a large room, the following two installation methods are used:

It is required that the metal bottom box installed on the ground should be sealed, waterproof, dustproof and have a lifting function. This method is expensive for design and installation. In addition, since the office location of the staff cannot be predicted in advance, the flexibility is not very good. It is recommended that the location be determined according to the functional use of the room and then pre-buried, but it is not suitable for mass use, so as not to affect the appearance.