News

Aimit has complete production equipment, perfect technical testing methods and rich production experience

Company News

Industry News

Exhibition

Home  >  News  >  Industry News
Industry News

The function and fault determination method of the indicator light of the optical fiber transceiver

The function and fault determination method of the indicator light of the optical fiber transceiver

1. First, check whether the indicator light of the optical fiber transceiver or optical module and the indicator light of the twisted pair port are on?A. If the...

2022-09-16

The material of the wire

The material of the wire

There are many copper core materials for network cables, such as iron-aluminum, copper-clad aluminum, copper-clad silver, all-copper, oxygen-free copper an...

2022-09-16

The basic components of fiber-to-the-home home network cabling

The basic components of fiber-to-the-home home network cabling

1. Concealed pipe: a pre-buried pipe used to lay various cables such as optical cables, Category 5 lines, telephone lines, power lines, etc., a traction wire (u...

2022-09-15

Common faults and solutions of optical fiber transceivers

Common faults and solutions of optical fiber transceivers

1. Fault phenomenon: POWER light is on, RX light and LINK light are not onSolution: This fault phenomenon indicates that there is a problem with one optical pat...

2022-09-15

Is the insertion loss of the fiber patch cord as small as possible?

Is the insertion loss of the fiber patch cord as small as possible?

As a device for patching signals and connecting optical circuits, the fiber jumper is a device that connects the signal and the optical path. The smaller the in...

2022-09-15

What are the factors that affect cable performance?

What are the factors that affect cable performance?

1. Ultraviolet (UV) - Do not use cables without UV protection in direct sunlight.2. Heat - the temperature of the cable in the metal pipe or trunking is very hi...

2022-09-14

Gigabit Fiber Optic Transceiver Standard

Gigabit Fiber Optic Transceiver Standard

The standard of Gigabit Ethernet is formulated by IEEE 802.3, and there are currently two cabling standards, 802.3z and 802.3ab. Among them, 802.3ab is a cablin...

2022-09-14

What is the theoretical maximum loss value of an optical fiber?

What is the theoretical maximum loss value of an optical fiber?

How much can the theoretical maximum loss of optical fiber exceed? It depends on what type of optical fiber you use and what it is used for. Even if the loss of...

2022-09-14

What are the characteristics of single mode fiber?

What are the characteristics of single mode fiber?

Single-mode fiber (SingleModeFiber): The central glass core is very thin (the core diameter is generally 9 or 10μm), and only one mode of fiber can be transmitt...

2022-09-09

Single-core fiber 1310nm wavelength, how many Mbps can the theoretical maximum uplink rate reach?

Single-core fiber 1310nm wavelength, how many Mbps can the theoretical maximum uplink rate reach?

1. Single Mode Fiber: The central glass core is very thin (the core diameter is generally 9 or 10 μm), and only one mode of fiber can be transmitted. Therefore,...

2022-09-09

How to ensure the long-term stable and normal operation of the server?

How to ensure the long-term stable and normal operation of the server?

How to ensure the long-term stable and normal operation of the server? To ensure the long-term stable and normal operation of the server, it is not enough to re...

2022-09-09

Common Obstacles and Causes of Optical Cable Lines

Common Obstacles and Causes of Optical Cable Lines

1. Common obstacles and causes of optical cable lines(1) All lines are interrupted: the r-los alarm occurs on the optical panel, the possible reason is that the...

2022-09-08
  • Previous
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • Next