News

Aimit has complete production equipment, perfect technical testing methods and rich production experience

Company News

Industry News

Exhibition

Home  >  News
News

ECOC 2024

ECOC 2024

Exhibition: ECOC 2024;Exhibition time: 23th to 25th Sep 2024;Address: Frankfurt, Germany. AIMIT stand number: B112

Know More

The difference between super five and six network cables

The difference between super five and six network cables

The network cable, the most inconspicuous part of the computer network, is the most easily overlooked component. When setting up a network, most people pay atte...

2022-06-06

Network wiring, how to ensure the strength of the wireless signal at home?

Network wiring, how to ensure the strength of the wireless signal at home?

Home improvement network wiring, the wireless router is placed in the weak current box, how to ensure the strength of the wireless signal at home? question:In ...

2022-06-06

Single-mode fiber optic transceiver connection method

Single-mode fiber optic transceiver connection method

The interface type of the optical fiber jumper: there are square mouth and round mouth and should be the same as the port type of the photoelectric conversion p...

2022-06-06

How much can a gigabit fiber optic transceiver bear?

How much can a gigabit fiber optic transceiver bear?

How much can a gigabit fiber optic transceiver bear? -28 dbm.Attenuation is closely related to ACR, and a small attenuation will contribute to the improvement o...

2022-06-06

What are the precautions for network wiring?

What are the precautions for network wiring?

1. Principles of wiring:1. Integrated wiring. In the wiring design, the layout of telephone lines, cable TV cables, power lines and twisted pairs should be cons...

2022-06-06

What principles should we follow when assembling wiring?

What principles should we follow when assembling wiring?

Integrated wiring is not a difficult project to understand. As long as you understand its principles and compare product performance a lot, you will be able to ...

2022-06-02

Office wiring cable routing

Office wiring cable routing

①The office cable can go directly to the ceiling rack, put it into the wire trough, and bury it in the wall. Industry standards allow the introduction of juncti...

2022-06-02

What details should be paid attention to in office network wiring?

What details should be paid attention to in office network wiring?

Most of the integrated wiring is a hidden line project. There are many problems in the later modification and maintenance. To build a reasonable design for stab...

2022-06-02

Do multimode fiber optic transceivers have to be used in pairs?

Do multimode fiber optic transceivers have to be used in pairs?

As a product of optical transceivers, fiber optic transceivers are generally used in pairs, but it is also normal for fiber optic transceivers and fiber optic s...

2022-06-02

Optical transceiver light problem?

Optical transceiver light problem?

The network is not stable and intermittent. It is found that the SPD light of the optical transceiver does not light up, and the 100M light is not lighted when ...

2022-06-02

After the fiber transceiver is connected, the two ends cannot communicate

After the fiber transceiver is connected, the two ends cannot communicate

1. The optical fibers are reversed, and the optical fibers connected to TX and RX are reversed.2. The connection between the RJ45 interface and the external dev...

2022-06-01

Solutions to common faults of fiber optic transceivers

Solutions to common faults of fiber optic transceivers

1. The Power light does not light up1. Power failure.2. The Link light is off1. The fault may be as follows:2. Check whether the fiber optic line is broken.3. C...

2022-06-01
  • Previous
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • Next